Best Juniper JN0-332 test training guide

ITCertKing Juniper JN0-332 exam materials contain the complete unrestricted dump. So with it you can easily pass the exam. ITCertKing Juniper JN0-332 exam training materials is a good guidance. It is the best training materials. You can use the questions and answers of ITCertKing Juniper JN0-332 exam training materials to pass the exam.

If you attend Juniper certification JN0-332 exams, your choosing ITCertKing is to choose success! I wish you good luck.

In order to meet the needs of each candidate, the team of IT experts in ITCertKing are using their experience and knowledge to improve the quality of exam training materials constantly. We can guarantee that you can pass the Juniper JN0-332 exam the first time. If you buy the goods of ITCertKing, then you always be able to get newer and more accurate test information. The coverage of the products of ITCertKing is very broad. It can be provide convenient for a lot of candidates who participate in IT certification exam. Its accuracy rate is 100% and let you take the exam with peace of mind, and pass the exam easily.

Why do most people choose ITCertKing? Because ITCertKing could bring great convenience and applicable. It is well known that ITCertKing provide excellent Juniper JN0-332 exam certification materials. Many candidates do not have the confidence to win Juniper JN0-332 certification exam, so you have to have ITCertKing Juniper JN0-332 exam training materials. With it, you will be brimming with confidence, fully to do the exam preparation.

Through the feedback of many examinees who have used ITCertKing's training program to pass some IT certification exams, it proves that using ITCertKing's products to pass IT certification exams is very easy. Recently, ITCertKing has developed the newest training solutions about the popular Juniper certification JN0-332 exam, including some pertinent simulation tests that will help you consolidate related knowledge and let you be well ready for Juniper certification JN0-332 exam.

Exam Code: JN0-332
Exam Name: Juniper (Juniper Networks Certified Internet Specialist, SEC (JNCIS-SEC))
One year free update, No help, Full refund!
Total Q&A: 406 Questions and Answers
Last Update: 2014-01-27

ITCertKing is a professional IT certification sites, the certification success rate is 100%. This number is proved by candidates through practice. Because ITCertKing has a strong IT team of experts, they are committed to study exam questions and answers, and serve the vital interests of the majority of candidates. They use their own professional mind and experience to meet the needs of the candidates. According to the needs of the candidate, they consider the issue from all angles, and manufacturing applicability exam training materials. This material is Juniper JN0-332 exam training materials, which including questions and answers.

JN0-332 Free Demo Download: http://www.itcertking.com/JN0-332_exam.html

NO.1 Click the Exhibit button.
System services SSH, Telnet, FTP, and HTTP are enabled on the SRX Series device.
Referring to the configuration shown in the exhibit, which two statements are true? (Choose two.)
A. A user can use SSH to interface ge-0/0/0.0 and ge-0/0/1.0.
B. A user can use FTP to interface ge-0/0/0.0 and ge-0/0/1.0.
C. A user can use SSH to interface ge-0/0/0.0.
D. A user can use SSH to interface ge-0/0/1.0.
Answer: B,C

Juniper original questions   JN0-332 original questions   JN0-332   JN0-332

NO.2 Which type of Web filtering by default builds a cache of server actions associated with each URL it has
checked?
A. Websense Redirect Web filtering
B. integrated Web filtering
C. local Web filtering
D. enhanced Web filtering
Answer: B

Juniper study guide   JN0-332   JN0-332 test   JN0-332 certification training

NO.3 Which two statements are true about hierarchical architecture? (Choose two.)
A. You can assign a logical interface to multiple zones.
B. You cannot assign a logical interface to multiple zones.
C. You can assign a logical interface to multiple routing instances.
D. You cannot assign a logical interface to multiple routing instances.
Answer: B,D

Juniper exam dumps   JN0-332 exam   JN0-332 test   JN0-332

NO.4 Which configuration keyword ensures that all in-progress sessions are re-evaluated upon committing a
security policy change?
A. policy-rematch
B. policy-evaluate
C. rematch-policy
D. evaluate-policy
Answer: A

Juniper   JN0-332 exam   JN0-332 certification

NO.5 Which command do you use to display the status of an antivirus database update?
A. show security utm anti-virus status
B. show security anti-virus database status
C. show security utm anti-virus database
D. show security utm anti-virus update
Answer: A

Juniper   JN0-332 test answers   JN0-332 test   JN0-332 pdf

NO.6 Which three security concerns can be addressed by a tunnel mode IPsec VPN secured by AH?
(Choose three.)
A. data integrity
B. data confidentiality
C. data authentication
D. outer IP header confidentiality
E. outer IP header authentication
Answer: A,C,E

Juniper exam dumps   JN0-332 test answers   JN0-332   JN0-332 braindump   JN0-332

NO.7 A user wants to establish an HTTP session to a server behind an SRX device but is being pointed to
Web page on the SRX device for additional authentication.Which type of user authentication is
configured?
A. pass-through with Web redirect
B. WebAuth with HTTP redirect
C. WebAuth
D. pass-through
Answer: A

Juniper answers real questions   JN0-332   JN0-332 test questions   JN0-332

NO.8 Which zone is system-defined?
A. security
B. functional
C. junos-global
D. management
Answer: C

Juniper   JN0-332   JN0-332   JN0-332

NO.9 Which statement contains the correct parameters for a route-based IPsec VPN?
A. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
B. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
C. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}
policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface ge-0/0/1.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
D. [edit security ipsec]
user@host# show
proposal ike1-proposal
{
protocol esp;
authentication-algorithm hmac-md5-96;
encryption-algorithm 3des-cbc;
lifetime-seconds 3200;
}policy ipsec1-policy
{
perfect-forward-secrecy
{
keys group2;
}
proposals ike1-proposal;
}
vpn VpnTunnel
{
bind-interface st0.0;
ike
{
gateway ike1-gateway;
ipsec-policy ipsec1-policy;
}
establish-tunnels immediately;
}
Answer: D

Juniper   JN0-332 test   JN0-332 exam dumps   JN0-332 certification

NO.10 Click the Exhibit button.
You need to alter the security policy shown in the exhibit to send matching traffic to an IPsec VPN tunnel.
Which command causes traffic to be sent through an IPsec VPN named remote-vpn.?
A. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel remote-vpn
B. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then tunnel ipsec-vpn remote-vpn
C. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit ipsec-vpn remote-vpn
D. [edit security policies from-zone trust to-zone untrust]
user@host# set policy tunnel-traffic then permit tunnel ipsec-vpn remote-vpn
Answer: D

Juniper dumps   JN0-332 certification training   JN0-332 exam dumps   JN0-332   JN0-332 braindump   JN0-332

NO.11 Click the Exhibit button.
Your IKE SAs are up, but the IPsec SAs are not up.Referring to the exhibit, what is the problem?
A. One or more of the phase 2 proposals such as authentication algorithm, encryption algorithm do not
match.
B. The tunnel interface is down.
C. The proxy IDs do not match.
D. The IKE proposals do not match the IPsec proposals.
Answer: C

Juniper study guide   JN0-332 demo   JN0-332 demo   JN0-332 study guide

NO.12 Which two statements regarding external authentication servers for firewall user authentication are
true? (Choose two.)
A. Up to three external authentication server types can be used simultaneously.
B. Only one external authentication server type can be used simultaneously.
C. If the local password database is not configured in the authentication order, and the configured
authentication server is unreachable, authentication is bypassed.
D. If the local password database is not configured in the authentication order, and the configured
authentication server rejects the authentication request, authentication is rejected.
Answer: B,D

Juniper   JN0-332 certification   JN0-332   JN0-332   JN0-332   JN0-332

NO.13 Which UTM feature requires a license to function?
A. integrated Web filtering
B. local Web filtering
C. redirect Web filtering
D. content filtering
Answer: A

Juniper   JN0-332   JN0-332 exam   JN0-332 test

NO.14 You want to allow your device to establish OSPF adjacencies with a neighboring device connected to
interface ge-0/0/3.0. Interface ge-0/0/3.0 is a member of the HR zone.Under which configuration
hierarchy must you permit OSPF traffic?
A. [edit security policies from-zone HR to-zone HR]
B. [edit security zones functional-zone management protocols]
C. [edit security zones protocol-zone HR host-inbound-traffic]
D. [edit security zones security-zone HR host-inbound-traffic protocols]
Answer: D

Juniper   JN0-332 demo   JN0-332

NO.15 Click the Exhibit button.
In the exhibit, a new policy named DenyTelnet was created. You notice that Telnet traffic is still allowed.
Which statement will allow you to rearrange the policies for the DenyTelnet policy to be evaluated before
your Allow policy?
A. insert security policies from-zone A to-zone B policy DenyTelnet before policy Allow
B. set security policies from-zone B to-zone A policy DenyTelnet before policy Allow
C. insert security policies from-zone A to-zone B policy DenyTelnet after policy Allow
D. set security policies from-zone B to-zone A policy Allow after policy DenyTelnet
Answer: A

Juniper certification training   JN0-332 test answers   JN0-332 answers real questions   JN0-332 dumps   JN0-332 study guide

NO.16 Which three statements are true regarding IDP? (Choose three.)
A. IDP cannot be used in conjunction with other Junos security features such as SCREEN options, zones,
and security policy.
B. IDP inspects traffic up to the Application Layer.
C. IDP searches the data stream for specific attack patterns.
D. IDP inspects traffic up to the Presentation Layer.
E. IDP can drop packets, close sessions, prevent future sessions, and log attacks for review by network
administrators when an attack is detected.
Answer: B,C,E

Juniper exam dumps   JN0-332   JN0-332 braindump   JN0-332 test questions   JN0-332

NO.17 Which security or functional zone name has special significance to the Junos OS?
A. self
B. trust
C. untrust
D. junos-global
Answer: D

Juniper exam dumps   JN0-332 practice test   JN0-332 practice test   JN0-332

NO.18 You must configure a SCREEN option that would protect your router from a session table flood.Which
configuration meets this requirement?
A. [edit security screen]
user@host# show
ids-option protectFromFlood
{
icmp
{
ip-sweep threshold 5000;
flood threshold 2000;
}
}
B. [edit security screen]
user@host# show
ids-option protectFromFlood
{
tcp
{
syn-flood
{
attack-threshold 2000;
destination-threshold 2000;
}
}
}
C. [edit security screen]
user@host# show
ids-option protectFromFlood
{
udp
{
flood threshold 5000;
}
}
D. [edit security screen]
user@host# show
ids-option protectFromFlood
{
limit-session
{
source-ip-based 1200;
destination-ip-based 1200;
}
}
Answer: D

Juniper exam prep   JN0-332 certification   JN0-332

NO.19 Regarding content filtering, what are two pattern lists that can be configured in the Junos OS? (Choose
two.)
A. protocol list
B. MIME
C. block list
D. extension
Answer: B,D

Juniper   JN0-332   JN0-332 test answers

NO.20 Which two statements regarding symmetric key encryption are true? (Choose two.)
A. The same key is used for encryption and decryption.
B. It is commonly used to create digital certificate signatures.
C. It uses two keys: one for encryption and a different key for decryption.
D. An attacker can decrypt data if the attacker captures the key used for encryption.
Answer: A,D

Juniper original questions   JN0-332 practice test   JN0-332 questions

ITCertKing offer the latest 1Z0-597 exam material and high-quality FCNSA.v5 pdf questions & answers. Our 70-466 VCE testing engine and 00M-229 study guide can help you pass the real exam. High-quality 3I0-012 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-332_exam.html